Vupoint Solutions PDS-ST510-VP Bedienungsanleitung PDF herunterladen

PDS-ST510-VP Manual

1. Key features

600/300 dpi resolution scan selection

Directly save JPEG file to microSD/microSDHC card

Supports microSD/microSDHC card up to 32GB

Driver free to download for Windows® XP, Windows® Vista™,

Windows® 7 and Mac OS® 10.4 or above

(direct plug-in, driver installation not required)

2. Functional parts

Part

Function

Resolution

Select High(600dpi) / Low(300dpi) resolution;

High / Low resolution mode icon will be displayed on

status LCD screen.

Stitch file

Create new folder for file storage.

Power button

Power On/Off: Switch this key left or right to turn

scanner on or off.

Scan

In power on mode, press this button to start scanning,

press this button again to stop scanning

Scan LED indicator

Ready for scan: Green LED on

Error LED indicator

Over speed: Red LED on

LCD screen

Scanning status display

SF LED indicator

Stitch file: White LED on

Battery door

For 4.2V rechargeable battery

microSD card slot

microSD/microSDHC card storage location.

USB interface

Download photo to a computer via USB cable provided.

Time set

Press to enter Time and Date setting mode

Format button

Press this button to format the microSD/SDHC card.

3. Explanation of the status icons

Item

Function

Description

SD card indicator

Photos will be stored in microSD card

Battery indicator

Battery is full Empty battery

Counting indicator

Show scanned files in microSD card

Selected resolution

High:600 dpi / Low:300 dpi

4. Using the scanner

4.1 Charging the battery

1. Before first using the scanner, it is recommended to charge the battery for 6-8 hours.

2. To charge, connect the scanner to a (1) USB 2.0 port or (2) an outlet with the power

adapter included. When charging, “Err” (Error) red light will be lit and will turn off once

the battery is fully charged.

Note: Do not remove the battery from the battery compartment.

4.2 Inserting a microSD memory card (not included)

To operate the scanner, you must insert a microSD Card (not supplied) to record and store your

pictures. Inserting the microSD memory card:

1. Turn OFF the scanner.

2. Insert the microSD card into the microSD card slot (with metal side facing upwards).

Gently press in until card is clicked in and latched. The SD card indicator must

appear on the LCD screen.

Note: Do not force the card into the slot; forcing may damage scanner and the microSD memory

card. Align microSD card position (as marked) and try again.

4.3 Time setting

1. Press [TIME SET] button to enter time setting mode by using a thin, blunt object, such

as a paperclip to access the button. The LCD screen will read “1##” (step 1) for the year.

“##” is a set of number that would be changed to correspond to the actual time/date

setting. The numbers 1-5 in front of “##” indicates each step in the settings.

2. Press the [STITCH FILE] or [DPI] buttons to select the current Year.

3. Press [SCAN] button to confirm setting. The LCD screen will now read “2##.”

4. Repeat steps 2 and 3 to select the Month, Date, Hour, and Minute.

Indicator

Setting

1##

Year

2##

Month

3##

Date

4##

Hour

5##

Minute

5 After setting the Minute, “5##”, press the [TIME SET] button again to complete the Time

and Date setting.

4.4 Formatting the microSD memory card

Note: Formatting the microSD is recommended but not necessary. All contents on the microSD

card will be erased during formatting.

1. Insert a microSD card into the scanner with metal side facing upwards. Then power on

the scanner.

2. Press the [FORMAT] button with a thin, blunt object, such as the end of a paperclip to

access the button. An “F” shows on the LCD screen.

3. Press the [SCAN] button once to begin formatting microSD card.

4. The microSD card indicator will blink until the formatting process is complete.

4.5 Calibrating your scanner

Note: Perform calibration only when white balance needs adjustment.

1. Turn on the scanner by sliding the [POWER] button to ON. Then place the scanner on

the provided “White Balance Calibration” paper.

2. Click and hold onto the [STITCH FILE] button. While holding onto the [STITCH FILE]

button, press the [SCAN] button once and then release both buttons. SD symbol will

flash and “GREEN” and “RED” LED light will turn on.

3. Do not move the scanner. Wait until the “RED” LED light turns off. “GREEN” LED light

will stay on.

4. With only the “GREEN” LED light on, start scanning the white paper by sliding the

scanner across the paper until the “GREEN” LED light turns off. (Slide the scanner

backwards if necessary).

5. Slide the [POWER] button to OFF to turn off the scanner. Calibration is complete.

4.6 Setting the resolution

1. By pressing the [DPI] resolution button on the scanner, you may choose between high

resolution (600 dpi) and low resolution (300 dpi).

2. The high or low resolution mode will be displayed on the LCD screen to reflect your

choice.

4.7 Stitch file

To group scanned files into a new folder within the microSD card use the Stitch file function.

1. Press the [STITCH FILE] button to create a new folder within the microSD card for files

storage. SF white LED light will turn on.

2. Then scan your documents. Your files will be saved into the new folder.

3. To save another new set of scans in another folder, press the [STITCH FILE] button

again to generate a new folder.

For free optional stitching software, please download the program from the following link:

http://research.microsoft.com/en-us/um/redmond/groups/ivm/ice/

4.8 How to scan

Note: To scan, make sure your scanner is not connected to the computer.

1. Turn on the scanner by sliding the [POWER] button to ON.

2. Place the document on a flat surface and hold down the document with one hand.

3. Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto the

paper to ensure the most of the document can be scanned. Make sure to keep the

scanning area in between the scanning width indicator marked on the side of the

scanner.

4. Hold the scanner flat against the material and then press the [SCAN] button once.

5. Slide the scanner slowly, keeping you hand stable to get the best quality picture.

6. Press the [SCAN] button again to stop scanning.

5. LED light indications

“GREEN” SCAN LED ON Scan in progress.

“GREEN” SCAN LED OFF Standby / Scan is complete.

----------------------------------------------------------------------------------------------------

“RED” ERROR LED ON Scanning too fast.

May cause scanning error.

Restart and scan again.

“RED” ERROR LED OFF No error in scanning speed.

Continue scanning process.

---------------------------------------------------------------------------------------------------------------------

“WHITE” SF LED ON/OFF A new folder created.

﹡Scan will START when button is pressed

﹡To END scan, press button again

1 2

PDS-ST510-VP Manual 1

Inhaltsverzeichnis

Seite 1 - PDS-ST510-VP Manual

PDS-ST510-VP Manual 1. Key features 600/300 dpi resolution scan selection Directly save JPEG file to microSD/microSDHC card Supports microSD

Seite 2

6. Viewing your scans 1. Connect your scanner to your computer and then turn on your scanner. 2. Your computer should recognize the scanner as a “

Kommentare zu diesen Handbüchern

Keine Kommentare

Vupoint Solutions PDS-ST510-VP Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Adapter für die Scannertransparenz Vupoint Solutions PDS-ST510-VP herunter. VuPoint Solutions PDS-ST510-VP User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Adapter für die Scannertransparenz Vupoint Solutions PDS-ST510-VP